CAS Thank you for Anything Goes

Time for the ever-popular theme at Retro Rubber . . . Anything Goes!  So drag out your stamps (at least a year or more older) and show us your creativity!

I have a need for thank you cards, so I went for a quick and easy fall themed version.  I was inspired by CAS(E) this sketch challenge, and this card came together in less than 10 minutes.

First the cream cardstock is pressure embossed with Darice Fall Leaves Swirl then inked with Memento Peanut Brittle in to highlight the design.  A strip of cream vellum is stamped with a very old Stamp Out Art from at least 1999 in Delicata Dark Brown Shimmer and heat embossed with clear embossing powder.  The sentiment is Studio Calico from 2009 and it is stamped in Delicata Celestial Copper and heat embossed with clear embossing powder.  The leaf is colored in with Delicata Celestial Copper and brush tip Fantastix.  Since the ink is pigment based it will not dry on the vellum and thus it can be heat embossed with clear embossing powder.  The vellum is wrapped around the pressure embossed baking and everything is adhered to the Kraft cardstock card base. 

Have some fun and join us at Retro Rubber with your Anything Goes project.  Just remember to use your stamps from the past and to enter only up to 10 challenges.

I would like to enter my card in the following challenges:

CAS(E) this sketch #248

TGIF Challenges #134 Gratitude

Rubber Buggy Challenge #6 Thank You

Textured Heartfelt Sympathy Card

My card along with another AIR is displayed on Imagine's blog today, both in honor of Heartfelt sympathy.

 

Sympathy cards are a gift given to comfort the bereaved, in this instance it is for a family member who now lives overseas.  I wanted to create something soft and beautiful to deliver a message of condolences and love.  The textured background is created with Amplify! and the shimmer of Brilliance Graphite Black sets of the Radiant Neon Electric Pink. 

Level:  Intermediate

Time:  45 minutes

 

Step 1

Apply Radiant Neon Electric Pink Amplify around card base.  Add drops of Amplify! in white and smaller drops of Amplify! in black.

 

Step2

Use a rubber brayer to move the Amplify! around on the card base.  Clean brayer with water.

 

Step 3

Heat Amplify! with a heat gun until the surface is cured and the texture puffs up.  Trim to a finished size of 5 ¼” x 4”.  Use the scraps to die cut mini hearts with Lawn Fawn’s Stitched Journaling Card set.

Step 4

Die cut Spellbinders Labels 54 Decorative Elements outer and inner portions from white cardstock.  Apply Brilliance Graphite Black ink with an Ink Blusher.

Step 5

Die cut the center square from the Amplify! textured card base. (not shown)

 

Step 6

Use a Post-It note to mask the center of the inner Decorative element and apply Brilliance Graphite Black ink with an Ink Blusher.

 

Step 7

Stamp sentiment in Radiant Neon Electric Pink.  I had forgotten to totally clean the stamp before this step . . . so step 8 made the “mistake” a creative choice instead and matched the card base!

Step 8

Gently ink the sentiment with Brilliance Graphite Black to add a bit more black low-lights to the image.

Step 9

Use Brilliance Graphite Black to ink the edges of the card front.  Adhere the Ampllfy! textured card base.  Adhere a section of DeNami Design white ribbon around the Decorative Element outer frame and adhere with dimensional foam adhesive to the card.  Adhere the Ampllfy! textured square over the ribbon and add the inner decorative frame.  Tie a double bow from DeNami Design white ribbon with Bows-It-All v2 and adhere into position.  Add the mini hearts on the ribbon and the inner decorative frame. 

Imagine

Amplify! Radiant Neon Electric Pink, Black, White

Radiant Neon Electric Pink

Brilliance Graphite Black

Ink Blusher

Other

White cardstock

Spellbinders--Labels 54 Decorative Elements

Unity Stamp Company--Heartfelt Sympathy

Lawn Fawn—Stitched Journaling Card die

DeNami Design—white ribbon

Rubber Brayer

Heat Gun

Vertigo Window Clings

Our challenge for November was to create something children would enjoy making at home.  My version is live on the Imagine Blog today.

 

What a fun challenge this month, a children’s craft project.  Vertigo Leaf Sun Catchers are a fun way to spend some quality time with the child in your life.  Simply place a leaf under a Vertigo Sheet and trace with a complementary color Fabrico pen.  Younger children can make simpler leaf shapes which are easy to cut out with scissors and older children who are more competent with scissors can complete the more complex maple leaf shapes.  After the leaves are cut out, StazOn inks can be added with ink blushers.  I would recommend gloves to keep fingers from becoming too inky!  Additional veins can be traced with Fabrico Pens.  Apply a few glue dots and adhere to your window for eye catching fall décor!

Imagine

Vertigo—Pebble or Taffeta work best

Fabrico—Lemon Yellow, Tangerine, Chocolate, Sand

StazOn—Saddle Brown, Orange Zest, Blazing Red

Ink Blusher

Craft Mat

Other

Leaf

Scissors

Glue dots

Colorful Autumn Thank You

We have a colorful challenge at Retro Rubber BlogChallenge.  A few lovely autumn colors.  Go check out the fantastic cards the Design Team has created!

I decided to resurrect an old technique to incorporate all these colors into fall inspired Thank You Card.

I inked a section of glossy white cardstock with a series of dye-based Memento inks in Dandelion, Cantaloupe, Tangelo, Lady Bug, Bamboo Leaves, and Elderberry.  After letting the ink dry I stamped the Judikens Fall Leaves Maple Leaf from 1995 in VersaMark ink and heat embossed with clear embossing powder.  The final step was inking over the entire surface in Memento Expresso Truffle and then buffing the ink off the embossed areas with a paper towel.  This creates a beautiful multicolored background don’t you think?

After inking up another section of glossy white cardstock it is die cut with Sizzix Thinlits 3-D Drop-Ins Thank You sentiment.  The background is a green vellum.  A strip of grosgrain ribbon with a knot adhered under the sentiment ties the whole card together.

Please do join us over at Retro Rubber and play along with this fun challenge. 

I played along with the following challenges!

Cut It Up Challenge #134 Thank You Cards

Just Us Girls Thankful

CAS(E) this sketch #246

Delightful Birthday Card

We recently had a birthday at our house!  My husband Greg is another year older.  Here is the card I created for him!

 I decided to play along with Your Next Stamp’s Sketch and Color Challenge with their delightful Perfect Chemistry stamp and die set.  (Pun intended!)

I started by stamping the light bulb image in Memento Luxe Tuxedo Black and heat embossing it with clear embossing powder.  A bit of Memento Luxe Gray Flannel colored the metallic portion of the light bulb.  His tongue is colored with Memento Dual Tip markers in Lady Bug.  Fireworks in Dandelion was perfect to color the rest of the image.  I scored a starburst pattern into a section of white cardstock then used a small paintbrush to highlight the scored lines with the same Fireworks Dandelion.

The back section is the plus sign stamped in Delicata Ruby Red.  The sentiment is also stamped in Delicata Ruby Red on a hand trimmed banner.  All three sections are edged in Delicata Sapphire Blue.  The light blue is Fireworks Summer Sky sponged onto the cardstock with an Ink Blusher. 

I am playing along with Your Next Stamp’s Challenge #76.

Stick It Down Double Page CHA Friends

Stick It Down has a really fun sketch for November!

Add caption

I had the great fortune to go to CHA last January and met several of my online friend In Real Life.  Seeing all the new releases for so many companies was incredible.  It was creativity on overload!

 

There were so many bright colors at CHA (Craft and Hobby Association) annual winter show.  When I looked through my photos of my friends I remembered a very old paper collection by Basic Grey named Lucky.  All the colors coordinate beautifully and I was able to use up a bunch of scraps to make the strips of the design.  My vendor badge made a great embellishment!

Halloween Birthday card

Wow, time got away from me and this post is late!  We have a new challenge over at Retro Rubber, and it is a sketch this go around!

I decided to flip the sketch and use some fun witches boots to create a birthday card for a family member born on Halloween.

I used Hero Arts Witch Feet Stamp and Cut set from 2016, and Taylored Expressions In & Out Birthday from September 2014.  The various Witch Feet are stamped and heat embossed with Irridescent Embossing Powder.  Imagine (Tsukineko) Delicata Golden Glitz and Black Shimmer are set off by Brilliance Pearlescent Lavender inks.  The images are "water colored" with the various inks using Ink Potion No. 9.  To set off the Witch Feet, Spellbinders Nested Lacy Pennats are die cut and inked with Brilliance Pearlescent Lavender,  The base card edges are also inked with Brilliance Pearlescent Lavender, topped with a layer inked in Delicata Golden Glitz.  I had a bit of Doodlebug Desings Black Chenille cardstock from 2008 that was a perfect layer for this card.

With some masking and an ink positioner I stamped the sentiment.  The top portion is from the Hero Arts Witch Feet Stamp and Cut set with the Halloween masked.  The Birthday is from part of the Taylored Expressions In & Out Birthday with the happy portion masked.  The sentiment is die cut with Spellbinders Classic Scalloped Squares small.  The rectangle is created by lining up the scallops and die cutting it slightly smaller than the square.

I hope my favorite Halloween witch enjoys her special card!