Friday, June 22, 2018

Quick Quotes Blessed Beyond Measure

Our task for Quick Quotes for the end of June is to use a previous month's Club Q offering.  Neva here to share a layout from events of this spring.  I decided that the Blessed Beyond Measure would be perfect for photos of my son serving as acolyte at our church.  This page kit is from November Club Q and the subtle colors and title worked so well with the theme of this layout.



As the photos I had were taken over three Sundays and had a bit of a sequence in the service it was important to move the sketch around to fit the flow of the photos.
  • The large photos are 5" x 7", so the mats were trimmed down by 1/2" on each dimension.  
  • The blue banner and a few of the scraps from the blue paper are trimmed to give the illusion of a continuous banner across the two pages.
  • The blue is edged with Powder Puff Chalking Ink in Deep Sea.
  • The papers are edged with Powder Puff Chalking Ink in Kokomo.
  • The chipboard pieces are edged with Powder Puff Chalking Ink in Mocha Mama.  
  • The smaller title is  also stamped in Powder Puff Chalking Ink in Mocha Mama.


The key to framing a circular photo is to print the photo slightly larger than the diameter of the frame
  • The large circle photo was printed as a 5" x 7" and trimmed down to fit the frame.
  • The smaller photos are 3 1/4" square and 2 3/4" square 



  • The title provided in the page kit is simply edged in Powder Puff Chalking Ink in Mocha Mama and backed with the provided black patterned paper.  Makes for a quick and stunning title.  
  • To make the ribbon easier to show the top side I tied the knots and then adhered them to the tags rather than threading the ribbon through the provided holes.  Just because the holes are there doesn't mean you must use them!


Quick Quotes Products
November Club Q Blessed Beyond Measure page kit
Powder Puff Chalking Ink in Mocha Mama, Kokomo, Deep Sea

Other Products
Celtic Lower Case Alphabet by Personal Stamp Exchange
Coffee Zig Marker

Thanks so much for stopping by Quick Quotes and do check out the fabulous Club Q kits that are still available as well as the fantastic July Club Q kits.  Although this kit is from the November Club Q selections, thinking outside the box allowed me to use it for a great layout beyond it's intended focus.

~Neva

Thursday, June 21, 2018

Congratulations Grad, you are one in a million!

One last graduation card, this one for a niece who graduated from the University of North Dakota done in school colors!




I started with green Coordinations cardstock with a white core center and the Darice Grad Caps embossing folder.  I sanded the cardstock to bring out the embossed images just a bit more.  Framelits Drop-Ins 61836 by Stephanie Barnard creates the frame along with Congratulations sentiment.   Black glitter cardstock by Fancy Pants Designs adds a bit of sparkle to the die cuts!  Thinlits 3D Drop-Ins 661574 by Stephanie Barnard "You are one in a Millon" is used to die cut the star embellishments.  The card is mounted on a white cardstock base. 


The inside of the card has a bit more fun with a green polka dot ribbon and star border along with the sentiment "You are one in a Million".  I was really pleased with the finished card and I am sure that our niece will enjoy her special celebration in an envelope!

I am delighted to enter the following challenges:
Scrappy Land AG w/ Sizzix dies 





Wednesday, June 20, 2018

Grad Cap Congrats

One more graduation card!  This one is for my nephew in Portland, he is one of several graduation announcements that grace our refrigerator right now!



I was inspired by the sketch at Sketch Saturday to pull together his quick but classic card.  His school colors are scarlet and grey, so I used a scrap left on my table of Trimcraft Black Out that is the reverse pattern to complete the sketch.   A bit of Offray ribbon that matched the scarlet red paper in my stash was a perfect compliment.  The large graduation cap is the biggest of three sizes from Yvonne Albritten's Set #12.  (I used the two smaller sizes on the card featured on Tuesday.)  The "Congrats" sentiment is from one of the Studio G's $1 stamps I found at Micheals a few years back.  The images are stamped in Memento Tuxedo Black, using my stamp platform so I could create a good crisp image.  The grad cap image is die cut with Stitched Squares by Elizabeth Craft Designs.  

I am delighted to enter the following challenges:
 


Tuesday, June 19, 2018

Congrats Grad for Retro Rubber

Yes siree bob . . . I am churning out the Graduation Congrats cards!  As mentioned before we have 2 grads in our own home, plus several other nieces and nephews.  Still a few more to share!  The challenge over at Retro Rubber for the next two weeks is a fun Tic Tac Toe.



Since Congrats was part of the board I knew one of the graduation cards in my production would involve our Retro Rubber Challenge.  I choose the Metallics, Congrats, Gems on the bottom row.


One of our nephew's High School colors are gold and black, so I was off and running with Delicata Golden Glitz and Black Shimmer.   The sparkle doesn't show up as well in the photo, as the sun was not cooperating when I took my photo.  I was inspired by a CAS sketch over at CAS(E) this sketch and the rest is quick work.  The grad caps are from Set #12 by Yvonne Albritten from July 2000.  I bought this set at a convention in Portland in the fall of 2000.  It has three different sizes of grad caps but I only used the two smaller ones.  The sentiment is from Technique Tuesdays Grad from May, 2015.  After stamping my images I edged the top panel with the Golden Glitz and the card base with Black Shimmer.  A few gold and black gems finish the card.  This was a fun card to create!  Hope Parker enjoys it!

Please do stop by and check out the design teams great interpretations of this challenge at Retro Rubber Challenge Blog!

I am delight to enter the following challenges:



Monday, June 18, 2018

Graduation Box Card

I have been wanting to make a box card for awhile, especially since I purchased the Box Card Die Set from The Stamps of Life by Stephanie Barnard.  Crafting a special graduation card for my DSD was the perfect time to give box card making a go!



Only one sheet of gold and one sheet of maroon were used in creating this fun card.  I started with the aforementioned Box Card Die Set, with a few additions.  Sizzix Framelits Drop-Ins 560147 added a few details to the center stand up pieces.  I also used Quickutz dies for the Grad Cap, diploma, Balloons, and Streamers.


A view from one side . . .


 . . . and then the other.  So many fun things to look at in this die cut card!  All the center decorations are die cut in positive and reverse images.  Recycled packaging is used for mounting the decorations to the mechanism inside the box card.  Xyron and glue dots were my friends to adhere this master piece together!


The envelope is made from another sheet of maroon cardstock, and a few remaining die cuts decorate the outside.  This card did not stay within the size of an A2 card so the custom sized envelop was necessary!



I love how the card folds flat for mailing, or in this case hand carrying on the flight to Arizona!

Thanks so much for stopping by!  I still have a few more graduation cards to share, stay tuned!

I am delighted to enter the following challenges:

Saturday, June 16, 2018

Graduation Card for John

We have two graduates in our home!  Grace graduated from ASU in May and I've yet to share her card . . . coming soon!  John graduated from High School last week, and this is the card he called "sick", as only a teenager could!


I started with Ten Second Studio's Metal Sheet in Black Pearl and used the Darice graduation caps embossing folder to give it some texture.  The front of the card is Sizzix Framelits Drop-Ins 661574 die cut from red cardstock.  Congratulations and the stars are die cut from Recollections Silver Glitter Paper.  It is really shimmery in the sunlight, the photograph does not do the shine justice!  The accent stars are from Sizzix One in a Million Thinlits 3D Drop-Ins 662256 along with the Sizzix Celebrate Thinlits 3D Drop-Ins 661574.  The card base is Recollections black cardstock.


The inside is Sizzix Celebrate Thinlits 3D Drop-Ins 661574 with a few more embellishments.  The scallops are the Sizzix Framelits Drop-Ins 560147.  I cut one side from patterned Black Out by Trim Craft.  The other is white cardstock.  The choice of colors to match John's high school colors made creating this card easy although a bit time consuming.

Thanks so much for stopping by!  Stay tune for more graduation cards . . . they have already been sent, but I didn't have the time to blog and share them with you!

I would like to enter this card in the following challenges:

Friday, June 15, 2018

Father's Day Part Two

Yesterday I shared a card for Father's Day, today I have the card I created for my husband.  Using a new sketch idea and with the images and papers already selected I was good to go!


The tools are from Technique Tuesday's Tool Time stamped in StazOn Jet Black on Canson silver paper, yellow and blue cardstock.  The sentiment is by Hero Arts CL 498 and is stamped in Versa Fine Majestic Blue.  Both pieces of yellow cardstock are also edged in Majestic Blue.  The ancient Francis Meyer 8 1/2" x 11" paper is trimmed a bit wider to get more of the fun tools included on the card.

I was inspired by:
SIP #154 Sketch

I would also like to enter the following challenges:
Cardz 4 Guys #196 Father's Day
Try it on Tuesday For the boys
Always Fun Challenges For Male/Dad
Cards in Envy Let's Hear It for the Boys
Crafty Cardmakers For a Man/Boy

Let me know which version of card you like better!  Thanks for stopping by!